Aller au contenu

Meilleur matériel réseau 2.5GbE et 10GbE

Switchs multi-gig, cartes réseau et câblage abordables pour dépasser le 1GbE lors des transferts NAS.

Divulgation : certains liens de cette page sont des liens affiliés. Les achats via ces liens peuvent nous rapporter une commission sans coût supplémentaire pour vous.

Gigabit Ethernet caps large transfers at roughly 110 MB/s, which quickly feels slow when moving media libraries or restoring backups. 2.5GbE is now cheap and often built into new mini PCs, while 10GbE is worth it between a NAS and a main workstation. Plan for the NIC, a multi-gig switch, and Cat6 (or better) cabling.

Meilleure mise à niveau d'entrée

2.5GbE unmanaged switch (5–8 port)

Visiter le site
  • Multiple 2.5GbE ports
  • Fanless and silent
  • Plug-and-play
  • Low power draw

The simplest way to speed up NAS transfers if your devices already have 2.5GbE ports.

Meilleur pour machines existantes

USB 3 / PCIe 2.5GbE adapter

Visiter le site
  • Adds 2.5GbE to any PC
  • Realtek or Intel chipset
  • USB or PCIe options
  • Cheap per device

Prefer Intel-based PCIe NICs for servers; USB adapters are convenient for laptops and quick tests.

Meilleur pour un backbone NAS

10GbE SFP+ managed switch

Visiter le site
  • SFP+ and/or 10GBASE-T
  • VLAN and management
  • Great NAS-to-workstation speed
  • Direct-attach copper option

Use SFP+ DAC cables for short runs to keep cost and heat down; add 10GBASE-T where you need RJ45.

Is 2.5GbE worth it?

2.5GbE is a cheap, practical upgrade over gigabit: it uses the same Cat5e or Cat6 cabling over normal distances, many mini PCs and motherboards already include it, and 2.5G switches are now affordable. It helps most when you transfer large files between a NAS and a fast client, or when several people use the NAS at once. If you mostly stream media and browse, gigabit is still enough.

What every device in the path needs

Speed is limited by the slowest link: both network adapters, the switch ports and the cable must support 2.5G. Check that your NAS and PC have 2.5GbE ports or add a PCIe or USB adapter, and prefer well-supported chipsets (Intel, and Realtek RTL8125 with a current driver) to avoid driver problems on Linux. Use Cat5e or better cabling, and test throughput with `iperf3` to confirm you are actually getting the speed you paid for.

Switches, adapters and when to jump to 10G

A fanless unmanaged 2.5G switch is the simplest choice; a managed one adds VLANs and monitoring. If you need more than 2.5G between a NAS and a workstation, consider 10GbE with SFP+ or 10GBASE-T, but plan for noise, heat and higher idle power. See our [switch buying guide](/hardware/best-network-switches) and [networking guide](/blog/home-server-networking).

Questions fréquentes